Add A Turbo 6.7 Cummins Kit | Dodge Towing Compound Turbos
Towing Compounds Fit 2007.5 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Dodge 6.7L
*EGR And Exhaust Brake Can Remain Intact, If Desired*
DPS 6.7 Cummins Add a Turbo Compounds for Dodge Cummins Fits 2007.5-2018. Our 6.7L Stock Towing Twin Turbos use your HE351VE Turbo. Retains exhaust brake, seriously reduces EGT's.
Spools like stock and cools EGT’s 250-400 degrees.
Improves air flow by nearly 2.5 times.
Choosing Your Stock Add-a-Turbo Kit
Horsepower range: Stock to 650 HP
Driveability:
Tow Rating:
Horsepower Increase: 23%
Torque Increase: 24%
EGT Reduction: 250-400 degrees
Mileage Increase: Same to +1 mpg
Smoke Reduction
Features & Benefits
- Excellent 6.7 Cummins towing compounds
- Direct bolt-on application, no fabrication needed.
- Large, high flow air filter.
- Retains factory air box and factory look
- 4 inch downpipe included (2-piece for ease of install).
- Uses stock HE351VE turbo.
- Retains factory exhaust brake.
- All Stainless steel tubing.
- Support Bracket for S400 Turbo
- Flexible Steel braided oil supply lines, and OEM quality oil drain lines (flexible stainless steel).
- S475 Borg Warner (S400 with 75mm compressor wheel) as large turbocharger
- Upgrade options include increasing the S475 turbo up to an S480
- Lightning Fast Spool-Up. Diesel Power Source, Stocker/S475 Compound Turbo Kit is a very clean fitting 6.7 Cummins add a turbo kit.
EGT's are typically reduced by 250-400 degrees.
With Diesel Power Source 6.7 Cummins Compound turbo, horsepower, and torque are increased throughout the entire RPM band. Our DPS Cummins twin turbos increases horsepower by 22%-26%. A 500 HP truck will typically gain approximately 120-125 HP.
Specifically designed to operate awesome from stock horsepower all the way up to 600 horsepower. (If going beyond 600 HP we recommend using the S480 turbo, additional fee will apply. S480 is good to 700 HP with this kit.)
Kit includes:
Air Filter
Hot Pipe
2-Piece Downpipe
Support Bracket for S400 Turbo
New Air Intake tubing
Low-Pressure Charge Pipe
1-S475 Turbo (large turbo 75mm compressor wheel/ 96m turbine wheel, 1.32 A/R Housing)
Steel Braided High Temp Oil Supply Lines
New water line for turbo
Stainless steel exhaust tubing, tig welded.
Flex Oil Drain Line
All necessary gaskets, fittings, bolts, nuts & clamps
Heat shield
Heat wrap
Coolant Tank on some years
Complete Installation Instructions….and the absolute best customer support on the planet.
*With these 6.7 towing twins you use your stock HE351VE turbocharger*
Reasons Why Our 6.7 Compound Turbos Work So Well
- The air entering the cylinders is cooler, because dual compressors work together within their most efficient zone. The boost air is typically over 100 cooler than from a single turbo.
- The air entering the cylinder is at higher pressure, bringing the boost pressure and exhaust drive pressures near a 1:1 ratio.
- The intake stroke can actually produce power.
- There are additional air molecules in the cylinder which do not get involved in combustion which carry the heat out of the cylinder (similar to how a jet engine is cooler).
- It has more complete combustion in the cylinders because there’s more air in the cylinder to burn all of the fuel.
** This kit is capable of over 70 PSI, head studs are highly recommended for boost pressure over 45 psi, fire rings over 55 psi.
*Note: While the EGR and DPF can physically remain intact, most trucks will need to have already been emissions deleted. Diesel Power Source does not provide any emissions delete components.
