DPS Ford Cummins Swap Exhaust Manifold | Fits 12V Ford Cummins Conversion | Fummins Swap T3
Performance Fummins Exhaust Manifold for Ford Cummins Swap Kits
(Allows Turbo To Clear Heater Core / A/C)
** Legal for installation and street use in California**
DPS Ford Cummins Swap Exhaust Manifold for your 5.9L 12V Ford Cummins Conversion. This a performance 2-piece manifold especially for Fummins Swap Kits. This Ford fummins manifold places the turbo low and to the rear, clearing the heater a/c core. Fits all 1988-1998 Cummins 12 Valve 5.9 with Ford Cummins Conversion Kits with T3 turbos.
Manifold Comes With:
- 12 New Bolts
- 6 Steel Gaskets
This Ford fummins manifold is ideal for Ford Cummins swap kits, Ford Cummins conversions or Chevy Cummins swaps.
The Diesel Power Source 2-Piece Manifold for the Ford Cummins (Fummins Swap Kit ) for the 7.3 to 12 valve conversion kit for 12V Cummins Swap Kits is a great performance manifold and a factory replacement manifold. Cast from high nickel Ductile Iron (which can handle high heat). We've designed this Fummins manifold based on Computational Fluid Dynamic (CFD) Testing, which will results in quicker turbo spool-up, and increases exhaust gas efficiency.
OEM industrial exhaust manifolds are known to shrink significantly, causing manifold-cracking, gasket problems, and exhaust flow problems created by exhaust port misalignment. Our 2-Piece Manifold, on the other hand, allows manifold to expand and contract with heat, eliminating warping and cracking to the manifold, eliminating the dreaded manifold shrinkage.
The 2-Piece Manifold for Ford fummins vastly improves exhaust flow allowing better fuel efficiency, quicker turbo spool-up, increasing overall horsepower and torque, and cooling the end cylinders much better. It also has a divided scroll design to improve spool-up.
Features Include:
- Excellent exhaust flow characteristics lower EGT’s, improves overall performance.
- Drilled/Tapped ports, two sizes, for pyrometer and pressure fitting.
- 2-Piece Manifold prevents cracking.
- Black High Temperature Coating
- Comes pressed together, pressure tested and ready to install on the 7.3 to 12 valve conversion kit.
**This Diesel Power Source Exhaust Manifolds have been granted an exemption by CARB, which means they are legal to be installed and used in the state of California
The DPS Ford Cumins manifold (misspelled intentionally), will fit your 12V Ford Cummins Swap.
DPS Performance Fummins Exhaust Manifold for Ford Cummins Swap. Specifically made for Ford F250 Cummins Swap or F350 Cummins Swap kits, which allow turbo to clear heater a/c core. Fits 12 Valve cummins swap into Ford trucks. With the popularity of Ford 6.0 To Cummins Conversion Kit, this Fummins exhaust manifold for Ford fummins is a must.
